1071 Bus Hardware Overvoltage (en)
1. Check whether all PV cables are connected correctly.
2. Check PV open voltage is higher than upper threshold of specification.
3. Turn off AC output switch, DC input switch, and battery switch in order; then turn on in reverse sequence after 5 minutes.
4. If fault still exists, contact the distributor or FoxESS support.
This article is based on official FoxESS technical documentation. For detailed manufacturer guides, please visit the FoxESS Support page.
2. Check PV open voltage is higher than upper threshold of specification.
3. Turn off AC output switch, DC input switch, and battery switch in order; then turn on in reverse sequence after 5 minutes.
4. If fault still exists, contact the distributor or FoxESS support.
This article is based on official FoxESS technical documentation. For detailed manufacturer guides, please visit the FoxESS Support page.