1182 BDC Overcurrent Permanent Fault (en)
1. Check whether output is overloaded or short-circuited.
2. Shut down battery; check communications cable and power cable between inverter and battery are properly connected.
3. Turn off AC output switch, DC input switch, and battery switch in order; then turn on in reverse sequence after 2 minutes.
4. If fault still exists, contact the distributor or FoxESS support.
This article is based on official FoxESS technical documentation. For detailed manufacturer guides, please visit the FoxESS Support page.
2. Shut down battery; check communications cable and power cable between inverter and battery are properly connected.
3. Turn off AC output switch, DC input switch, and battery switch in order; then turn on in reverse sequence after 2 minutes.
4. If fault still exists, contact the distributor or FoxESS support.
This article is based on official FoxESS technical documentation. For detailed manufacturer guides, please visit the FoxESS Support page.